Shielded SMD Power Inductor (PCDR Series)-Tech Company

Thick Film Resistor (CR..A Series)

Shielded SMD Power Inductor (PCDR Series)

Automotive Grade Chip Resistor - CR..A Series
Files Download

0628 / 0728 / 0730 / 0732 / 0745 / 1045 / 1255 / 1265 / 1275

Shielded SMD Power Inductor - PCDR Series
 

Shielded SMD power inductor , compact , low profile with low DCR and large current , with magnetically shielded against rediation.

Features

  • Compact, low profile with low DCR and large current.
  • With magnetically shielded against radiation.
  • Flat bottom surface allows reliable mounting onto the board.
  • Available on tape and reel for auto surface mounting.

Applications

  • Portable Telephones.
  • Personal Computers.
  • DC/DC Converters, etc.
  • Other Various Electronic Appliances.

Inductance and Rated Current Ranges

- PCDR0628: 1.0 ~ 1000μH, 2.1 ~ 0.12A
- PCDR0728: 3.3 ~ 56μH, 1.6 ~ 0.5A
- PCDR0730: 3.3 ~ 100μH, 1.8 ~ 0.35A
- PCDR0732: 1.0 ~ 1000μH, 2.2 ~ 0.13A
- PCDR0745: 1.0 ~ 1500μH, 4.0 ~ 0.10A
- PCDR1045: 1.0 ~ 1500μH, 7.8 ~ 0.22A
- PCDR1255: 6.0 ~ 1500μH, 3.6 ~ 0.29A
- PCDR1265: 2.0 ~ 150μH, 10 ~ 1.00A
- PCDR1275: 1.2 ~ 330μH, 13 ~ 1.30A
- Test equipment:
• L: HP4284A LCR meter
• DCR: Milli-ohm meter
- Electrical specifications at 25°C

Characteristics

- Saturation Rated Current (I sat): The current when the inductance becomes 30% lower than its nominal value. (Ta=25°C)
- Temperature Rated Current (I rms): The actual current when the temperature of coil becomes to Δ40°C. (Ta=25°C)
- Operating temperature range: -40 ~ 125°C

Product Identification

Shielded SMD Power Inductor - PCDR Series Product Identification

Standard Electrical Specifications

PCDR0628 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
PCDR0628□T1R0 1.0 M 1KHz, 0.5V 0.024 2.10
PCDR0628□T1R5 1.5 M 1KHz, 0.5V 0.025 2.00
PCDR0628□T1R8 1.8 M 1KHz, 0.5V 0.026 1.95
PCDR0628□T2R2 2.2 M 1KHz, 0.5V 0.022 1.90
PCDR0628□T2R8 2.8 M 1KHz, 0.5V 0.025 1.80
PCDR0628□T3R5 3.5 M 1KHz, 0.5V 0.030 1.70
PCDR0628□T4R1 4.1 M 1KHz, 0.5V 0.035 1.65
PCDR0628□T4R7 4.7 M 1KHz, 0.5V 0.036 1.60
PCDR0628□T6R8 6.8 M 1KHz, 0.5V 0.052 1.50
PCDR0628□T8R2 8.2 M 1KHz, 0.5V 0.061 1.35
PCDR0628□T100 10 M 1KHz, 0.5V 0.068 1.30
PCDR0628□T120 12 M 1KHz, 0.5V 0.081 1.10
PCDR0628□T150 15 M 1KHz, 0.5V 0.100 1.00
PCDR0628□T180 18 M 1KHz, 0.5V 0.129 0.87
PCDR0628□T220 22 M 1KHz, 0.5V 0.120 0.77
PCDR0628□T270 27 M 1KHz, 0.5V 0.179 0.71
PCDR0628□T330 33 M 1KHz, 0.5V 0.180 0.69
PCDR0628□T390 39 M 1KHz, 0.5V 0.239 0.61
PCDR0628□T470 47 M 1KHz, 0.5V 0.270 0.59
PCDR0628□T560 56 M 1KHz, 0.5V 0.330 0.51
PCDR0628□T680 68 M 1KHz, 0.5V 0.390 0.50
PCDR0628□T820 82 M 1KHz, 0.5V 0.459 0.43
PCDR0628□T101 100 M 1KHz, 0.5V 0.620 0.42
PCDR0628□T121 120 M 1KHz, 0.5V 0.659 0.33
PCDR0628□T151 150 M 1KHz, 0.5V 0.919 0.30
PCDR0628□T181 180 M 1KHz, 0.5V 1.049 0.28
PCDR0628□T221 220 M 1KHz, 0.5V 1.219 0.25
PCDR0628□T271 270 M 1KHz, 0.5V 1.598 0.22
PCDR0628□T331 330 M 1KHz, 0.5V 1.789 0.21
PCDR0628□T391 390 M 1KHz, 0.5V 2.289 0.20
PCDR0628□T471 470 M 1KHz, 0.5V 2.698 0.18
PCDR0628□T561 560 M 1KHz, 0.5V 3.198 0.16
PCDR0628□T681 680 M 1KHz, 0.5V 4.310 0.15
PCDR0628□T821 820 M 1KHz, 0.5V 4.698 0.13
PCDR0628□T102 1000 M 1KHz, 0.5V 5.790 0.12

■Helisto is capable to design according to customer special requirement

PCDR0728 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
PCDR0728□T3R3 3.3 M 1KHz, 0.5V 0.037 1.60
PCDR0728□T4R7 4.7 M 1KHz, 0.5V 0.045 1.50
PCDR0728□T6R8 6.8 M 1KHz, 0.5V 0.059 1.30
PCDR0728□T100 10 M 1KHz, 0.5V 0.083 1.10
PCDR0728□T150 15 M 1KHz, 0.5V 0.130 0.88
PCDR0728□T220 22 M 1KHz, 0.5V 0.180 0.75
PCDR0728□T330 33 M 1KHz, 0.5V 0.240 0.65
PCDR0728□T470 47 M 1KHz, 0.5V 0.340 0.54
PCDR0728□T560 56 M 1KHz, 0.5V 0.420 0.50

■Helisto is capable to design according to customer special requirement

PCDR0730 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
PCDR0730□T3R3 3.3 M 1KHz, 0.5V 0.023 1.80
PCDR0730□T4R7 4.7 M 1KHz, 0.5V 0.036 1.60
PCDR0730□T6R8 6.8 M 1KHz, 0.5V 0.041 1.50
PCDR0730□T100 10 M 1KHz, 0.5V 0.053 1.30
PCDR0730□T150 15 M 1KHz, 0.5V 0.084 1.00
PCDR0730□T220 22 M 1KHz, 0.5V 0.110 0.86
PCDR0730□T330 33 M 1KHz, 0.5V 0.160 0.65
PCDR0730□T470 47 M 1KHz, 0.5V 0.240 0.57
PCDR0730□T560 56 M 1KHz, 0.5V 0.280 0.53
PCDR0730□T680 68 M 1KHz, 0.5V 0.310 0.49
PCDR0730□T101 100 M 1KHz, 0.5V 0.450 0.35

■Helisto is capable to design according to customer special requirement

PCDR0732 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
PCDR0732□T1R0 1.0 M 1KHz, 0.5V 0.019 2.20
PCDR0732□T2R2 2.2 M 1KHz, 0.5V 0.021 2.00
PCDR0732□T3R3 3.3 M 1KHz, 0.5V 0.023 1.90
PCDR0732□T3R9 3.9 M 1KHz, 0.5V 0.029 1.85
PCDR0732□T4R7 4.7 M 1KHz, 0.5V 0.036 1.70
PCDR0732□T5R6 5.6 M 1KHz, 0.5V 0.039 1.65
PCDR0732□T6R8 6.8 M 1KHz, 0.5V 0.041 1.60
PCDR0732□T8R2 8.2 M 1KHz, 0.5V 0.049 1.50
PCDR0732□T100 10 M 1KHz, 0.5V 0.053 1.40
PCDR0732□T120 12 M 1KHz, 0.5V 0.071 1.20
PCDR0732□T150 15 M 1KHz, 0.5V 0.075 1.10
PCDR0732□T180 18 M 1KHz, 0.5V 0.099 1.00
PCDR0732□T220 22 M 1KHz, 0.5V 0.110 0.96
PCDR0732□T270 27 M 1KHz, 0.5V 0.150 0.85
PCDR0732□T330 33 M 1KHz, 0.5V 0.160 0.75
PCDR0732□T390 39 M 1KHz, 0.5V 0.230 0.70
PCDR0732□T470 47 M 1KHz, 0.5V 0.240 0.67
PCDR0732□T560 56 M 1KHz, 0.5V 0.300 0.60
PCDR0732□T680 68 M 1KHz, 0.5V 0.310 0.59
PCDR0732□T820 82 M 1KHz, 0.5V 0.424 0.49
PCDR0732□T101 100 M 1KHz, 0.5V 0.450 0.45
PCDR0732□T121 120 M 1KHz, 0.5V 0.620 0.40
PCDR0732□T151 150 M 1KHz, 0.5V 0.650 0.37
PCDR0732□T181 180 M 1KHz, 0.5V 1.020 0.30
PCDR0732□T221 220 M 1KHz, 0.5V 1.050 0.29
PCDR0732□T271 270 M 1KHz, 0.5V 1.530 0.24
PCDR0732□T331 330 M 1KHz, 0.5V 1.670 0.22
PCDR0732□T391 390 M 1KHz, 0.5V 1.990 0.21
PCDR0732□T471 470 M 1KHz, 0.5V 2.050 0.20
PCDR0732□T561 560 M 1KHz, 0.5V 3.100 0.17
PCDR0732□T681 680 M 1KHz, 0.5V 3.150 0.16
PCDR0732□T821 820 M 1KHz, 0.5V 4.500 0.14
PCDR0732□T102 1000 M 1KHz, 0.5V 4.780 0.13

■Helisto is capable to design according to customer special requirement

PCDR0745 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
PCDR0745□T1R0 1.0 M 1KHz, 0.5V 0.019 4.00
PCDR0745□T1R2 1.2 M 1KHz, 0.5V 0.019 3.20
PCDR0745□T3R3 3.3 M 1KHz, 0.5V 0.020 2.50
PCDR0745□T4R7 4.7 M 1KHz, 0.5V 0.029 2.00
PCDR0745□T6R8 6.8 M 1KHz, 0.5V 0.039 1.70
PCDR0745□T100 10 M 1KHz, 0.5V 0.036 1.30
PCDR0745□T150 15 M 1KHz, 0.5V 0.052 1.10
PCDR0745□T220 22 M 1KHz, 0.5V 0.061 0.90
PCDR0745□T330 33 M 1KHz, 0.5V 0.096 0.82
PCDR0745□T470 47 M 1KHz, 0.5V 0.125 0.75
PCDR0745□T560 56 M 1KHz, 0.5V 0.130 0.67
PCDR0745□T680 68 M 1KHz, 0.5V 0.200 0.60
PCDR0745□T820 82 M 1KHz, 0.5V 0.244 0.52
PCDR0745□T101 100 M 1KHz, 0.5V 0.250 0.50
PCDR0745□T151 150 M 1KHz, 0.5V 0.480 0.40
PCDR0745□T221 220 M 1KHz, 0.5V 0.850 0.33
PCDR0745□T331 330 M 1KHz, 0.5V 1.100 0.25
PCDR0745□T471 470 M 1KHz, 0.5V 1.050 0.22
PCDR0745□T681 680 M 1KHz, 0.5V 2.080 0.20
PCDR0745□T102 1000 M 1KHz, 0.5V 2.280 0.14
PCDR0745□T152 1500 M 1KHz, 0.5V 3.500 0.10

■Helisto is capable to design according to customer special requirement

PCDR1045 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
PCDR1045□T1R0 1.0 M 1KHz, 0.5V 0.012 7.80
PCDR1045□T1R5 1.5 M 1KHz, 0.5V 0.014 5.80
PCDR1045□T2R2 2.2 M 1KHz, 0.5V 0.015 5.60
PCDR1045□T3R3 3.3 M 1KHz, 0.5V 0.016 5.10
PCDR1045□T3R9 3.9 M 1KHz, 0.5V 0.018 4.10
PCDR1045□T4R7 4.7 M 1KHz, 0.5V 0.020 3.70
PCDR1045□T5R6 5.6 M 1KHz, 0.5V 0.022 3.40
PCDR1045□T6R8 6.8 M 1KHz, 0.5V 0.025 3.20
PCDR1045□T8R2 8.2 M 1KHz, 0.5V 0.027 3.10
PCDR1045□T100 10 M 1KHz, 0.5V 0.036 3.00
PCDR1045□T120 12 M 1KHz, 0.5V 0.033 2.50
PCDR1045□T150 15 M 1KHz, 0.5V 0.047 2.40
PCDR1045□T180 18 M 1KHz, 0.5V 0.052 2.20
PCDR1045□T220 22 M 1KHz, 0.5V 0.059 2.10
PCDR1045□T270 27 M 1KHz, 0.5V 0.073 1.70
PCDR1045□T330 33 M 1KHz, 0.5V 0.082 1.60
PCDR1045□T390 39 M 1KHz, 0.5V 0.099 1.50
PCDR1045□T470 47 M 1KHz, 0.5V 0.100 1.40
PCDR1045□T560 56 M 1KHz, 0.5V 0.110 1.30
PCDR1045□T680 68 M 1KHz, 0.5V 0.140 1.20
PCDR1045□T820 82 M 1KHz, 0.5V 0.190 1.10
PCDR1045□T101 100 M 1KHz, 0.5V 0.200 1.00
PCDR1045□T121 120 M 1KHz, 0.5V 0.280 0.80
PCDR1045□T151 150 M 1KHz, 0.5V 0.350 0.79
PCDR1045□T181 180 M 1KHz, 0.5V 0.420 0.69
PCDR1045□T221 220 M 1KHz, 0.5V 0.470 0.65
PCDR1045□T271 270 M 1KHz, 0.5V 0.620 0.55
PCDR1045□T331 330 M 1KHz, 0.5V 0.680 0.54
PCDR1045□T391 390 M 1KHz, 0.5V 0.900 0.49
PCDR1045□T471 470 M 1KHz, 0.5V 1.030 0.47
PCDR1045□T561 560 M 1KHz, 0.5V 1.300 0.40
PCDR1045□T681 680 M 1KHz, 0.5V 1.600 0.38
PCDR1045□T821 820 M 1KHz, 0.5V 1.800 0.33
PCDR1045□T102 1000 M 1KHz, 0.5V 2.800 0.32
PCDR1045□T152 1500 M 1KHz, 0.5V 3.400 0.22

■Helisto is capable to design according to customer special requirement

PCDR1255 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
I sat I rms
PCDR1255□T6R0 6.0 N 1KHz, 0.5V 0.016 3.60 4.90
PCDR1255□T100 10 M 1KHz, 0.5V 0.022 3.40 4.30
PCDR1255□T150 15 M 1KHz, 0.5V 0.026 2.80 3.90
PCDR1255□T220 22 M 1KHz, 0.5V 0.034 2.30 3.40
PCDR1255□T330 33 M 1KHz, 0.5V 0.042 1.90 3.10
PCDR1255□T470 47 M 1KHz, 0.5V 0.062 1.60 2.50
PCDR1255□T560 56 M 1KHz, 0.5V 0.0750 1.45 2.30
PCDR1255□T680 68 M 1KHz, 0.5V 0.083 1.30 2.20
PCDR1255□T101 100 M 1KHz, 0.5V 0.1170 1.10 1.80
PCDR1255□T151 150 M 1KHz, 0.5V 0.1900 0.88 1.40
PCDR1255□T221 220 M 1KHz, 0.5V 0.2700 0.72 1.20
PCDR1255□T331 330 M 1KHz, 0.5V 0.4100 0.59 1.00
PCDR1255□T471 470 M 1KHz, 0.5V 0.5200 0.49 0.88
PCDR1255□T681 680 M 1KHz, 0.5V 0.7600 0.43 0.73
PCDR1255□T102 1000 M 1KHz, 0.5V 1.1200 0.34 0.60
PCDR1255□T152 1500 M 1KHz, 0.5V 1.7300 0.29 0.48

■Helisto is capable to design according to customer special requirement

PCDR1265 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
I sat I rms
PCDR1265□T2R0 2.0 N 1KHz, 0.5V 0.0112 10.0 8.00
PCDR1265□T4R2 4.2 N 1KHz, 0.5V 0.0150 7.30 5.80
PCDR1265□T7R0 7.0 M 1KHz, 0.5V 0.0180 5.70 4.50
PCDR1265□T100 10 M 1KHz, 0.5V 0.0200 5.00 4.50
PCDR1265□T150 15 M 1KHz, 0.5V 0.0240 4.20 4.40
PCDR1265□T220 22 M 1KHz, 0.5V 0.0320 3.50 2.80
PCDR1265□T330 33 M 1KHz, 0.5V 0.041 2.80 2.20
PCDR1265□T470 47 M 1KHz, 0.5V 0.058 2.40 1.90
PCDR1265□T560 56 M 1KHz, 0.5V 0.0750 2.20 1.70
PCDR1265□T680 68 M 1KHz, 0.5V 0.079 2.00 1.60
PCDR1265□T101 100 M 1KHz, 0.5V 0.123 1.60 1.30
PCDR1265□T121 120 M 1KHz, 0.5V 0.184 1.30 1.00
PCDR1265□T151 150 M 1KHz, 0.5V 0.2730 1.00 0.80

■Helisto is capable to design according to customer special requirement

PCDR1275 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) ±20% IDC (A) max.
I sat I rms
PCDR1275□T1R2 1.2 N,M 1KHz, 0.5V 0.007 13.00 10.40
PCDR1275□T2R0 2.0 N,M 1KHz, 0.5V 0.0080 11.00 8.80
PCDR1275□T2R7 2.7 N,M 1KHz, 0.5V 0.009 10.00 8.00
PCDR1275□T3R3 3.3 N,M 1KHz, 0.5V 0.010 9.50 7.60
PCDR1275□T3R9 3.9 N,M 1KHz, 0.5V 0.010 9.00 7.20
PCDR1275□T5R6 5.6 N,M 1KHz, 0.5V 0.012 7.80 6.20
PCDR1275□T6R8 6.8 N,M 1KHz, 0.5V 0.013 7.20 5.90
PCDR1275□T100 10 M 1KHz, 0.5V 0.016 5.50 4.40
PCDR1275□T150 15 M 1KHz, 0.5V 0.018 4.70 3.70
PCDR1275□T220 22 M 1KHz, 0.5V 0.026 4.00 3.50
PCDR1275□T330 33 M 1KHz, 0.5V 0.039 3.20 3.40
PCDR1275□T390 39 M 1KHz, 0.5V 0.044 3.00 3.10
PCDR1275□T470 47 M 1KHz, 0.5V 0.053 2.70 3.00
PCDR1275□T560 56 M 1KHz, 0.5V 0.069 2.30 1.80
PCDR1275□T680 68 M 1KHz, 0.5V 0.078 2.00 2.00
PCDR1275□T820 82 M 1KHz, 0.5V 0.110 1.95 1.50
PCDR1275□T101 100 M 1KHz, 0.5V 0.125 1.90 1.50
PCDR1275□T151 150 M 1KHz, 0.5V 0.175 1.60 1.30
PCDR1275□T181 180 M 1KHz, 0.5V 0.200 1.45 1.20
PCDR1275□T221 220 M 1KHz, 0.5V 0.258 1.30 1.00
PCDR1275□T331 330 M 1KHz, 0.5V 0.370 1.10 0.88

■Helisto is capable to design according to customer special requirement

Files Download
RoHS Report

Best Sale

Company Introduction

aboutaboutaboutaboutabout

Resistor

Resistor

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

View More
Inductor

Inductor

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

View More
Capacitor

Capacitor

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

View More