SMD Power Inductor (PCD Series)-Tech Company

Thick Film Resistor (CR..A Series)

SMD Power Inductor (PCD Series)

0301 / 0302 / 0403 / 0502 / 0503 / 0504 / 0703 / 0705 / 1004 / 1005 / 1006

SMD Power Inductor - PCD Series
 

SMD high power , high saturation inductor, silver plated type , low cost design , ideal inductors for DC-DC donverteres, various sizes from small size of 3.5*3 to 10*9mm.

Features

  • High power, High saturation inductors.
  • Silver Plated Type, Low cost design.
  • Ideal inductors for DC-DC converters.
  • Available on tape and reel for auto surface mounting.

Applications

  • Power Supply For VTRs.
  • LCD Televisions.
  • Personal Computers.
  • Handheld Communication.
  • DC/DC Converters, etc.

Inductance and Rated Current Ranges

- PCD0301: 1.0 ~ 390μH, 1.40 ~ 0.10A
- PCD0302: 1.0 ~ 470μH, 2.20 ~ 0.07A
- PCD0403: 0.5 ~ 1000μH, 3.00 ~ 0.109A
- PCD0502: 1.0 ~ 1000μH, 4.00 ~ 0.14A
- PCD0503: 1.0 ~ 1000μH, 4.50 ~ 0.13A
- PCD0504: 0.6 ~ 3300μH, 11.0 ~ 0.085A
- PCD0703: 1.0 ~ 1000μH, 1.64 ~ 0.20A
- PCD0705: 1.0 ~ 1500μH, 3.40 ~ 0.16A
- PCD1004: 1.0 ~ 560μH, 8.70 ~ 0.32A
- PCD1005: 1.2 ~ 1000μH, 8.63 ~ 0.20A
- PCD1006: 1.0 ~ 1000μH, 9.50 ~ 0.46A
- Test equipment:
• L: HP4284A LCR meter
• DCR: Milli-ohm meter
-Electrical specifications at 25°C

Characteristics

- Rated DC Current: The DC current when the inductance becomes 10% lower than its initial value or DC current when temperature of coil is increased to 40°C (Ta=25°C).
- The smaller one is defined as Rated DC Current.
- Operating temperature range: -40 ~ 125°C

Product Identification

SMD Power Inductor - PCD Series Product Identification

Standard Electrical Specifications

PCD0301 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD0301□T1R0 1.0 M 100KHz, 0.25V 0.060 1.40
PCD0301□T1R5 1.5 M 100KHz, 0.25V 0.081 1.30
PCD0301□T1R8 1.8 M 100KHz, 0.25V 0.098 1.24
PCD0301□T2R2 2.2 M 100KHz, 0.25V 0.240 1.20
PCD0301□T2R7 2.7 M 100KHz, 0.25V 0.135 1.04
PCD0301□T3R3 3.3 M 100KHz, 0.25V 0.270 1.00
PCD0301□T3R9 3.9 M 100KHz, 0.25V 0.188 0.79
PCD0301□T4R7 4.7 M 100KHz, 0.25V 0.400 0.90
PCD0301□T5R6 5.6 M 100KHz, 0.25V 0.450 0.65
PCD0301□T6R8 6.8 M 100KHz, 0.25V 0.500 0.56
PCD0301□T8R2 8.2 M 100KHz, 0.25V 0.650 0.50
PCD0301□T100 10 M 1KHz, 0.25V 0.750 0.45
PCD0301□T120 12 M 1KHz, 0.25V 0.850 0.43
PCD0301□T150 15 M 1KHz, 0.25V 1.200 0.39
PCD0301□T180 18 M 1KHz, 0.25V 1.300 0.32
PCD0301□T220 22 M 1KHz, 0.25V 1.500 0.28
PCD0301□T270 27 M 1KHz, 0.25V 2.200 0.26
PCD0301□T330 33 M 1KHz, 0.25V 2.800 0.25
PCD0301□T470 47 M 1KHz, 0.25V 4.000 0.21
PCD0301□T560 56 M 1KHz, 0.25V 4.500 0.20
PCD0301□T680 68 M 1KHz, 0.25V 5.000 0.18
PCD0301□T820 82 M 1KHz, 0.25V 6.500 0.16
PCD0301□T101 100 M 1KHz, 0.25V 7.500 0.15
PCD0301□T221 220 M 1KHz, 0.25V 14.00 0.13
PCD0301□T331 330 M 1KHz, 0.25V 22.00 0.11
PCD0301□T391 390 M 1KHz, 0.25V 26.00 0.10

PCD 0302 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD0302□T1R0 1.0 M 100KHz, 0.25V 0.045 2.200
PCD0302□T1R2 1.2 M 100KHz, 0.25V 0.050 2.100
PCD0302□T1R4 1.4 M 100KHz, 0.25V 0.050 2.000
PCD0302□T1R5 1.5 M 100KHz, 0.25V 0.055 1.700
PCD0302□T1R8 1.8 M 100KHz, 0.25V 0.070 1.650
PCD0302□T2R2 2.2 M 100KHz, 0.25V 0.085 1.600
PCD0302□T2R7 2.7 M 100KHz, 0.25V 0.100 1.400
PCD0302□T3R3 3.3 M 100KHz, 0.25V 0.120 1.040
PCD0302□T3R9 3.9 M 100KHz, 0.25V 0.130 1.000
PCD0302□T4R7 4.7 M 100KHz, 0.25V 0.170 1.000
PCD0302□T5R6 5.6 M 100KHz, 0.25V 0.185 0.950
PCD0302□T6R8 6.8 M 100KHz, 0.25V 0.200 0.950
PCD0302□T8R2 8.2 M 100KHz, 0.25V 0.250 0.900
PCD0302□T100 10 K, M 1KHz, 0.25V 0.320 0.760
PCD0302□T120 12 K, M 1KHz, 0.25V 0.350 0.685
PCD0302□T150 15 K, M 1KHz, 0.25V 0.460 0.635
PCD0302□T180 18 K, M 1KHz, 0.25V 0.520 0.525
PCD0302□T220 22 K, M 1KHz, 0.25V 0.660 0.500
PCD0302□T270 27 K, M 1KHz, 0.25V 0.760 0.405
PCD0302□T330 33 K, M 1KHz, 0.25V 0.920 0.380
PCD0302□T390 39 K, M 1KHz, 0.25V 1.120 0.355
PCD0302□T470 47 K, M 1KHz, 0.25V 1.270 0.330
PCD0302□T560 56 K, M 1KHz, 0.25V 1.500 0.290
PCD0302□T680 68 K, M 1KHz, 0.25V 2.000 0.260
PCD0302□T820 82 K, M 1KHz, 0.25V 2.440 0.230
PCD0302□T101 100 K, M 1KHz, 0.25V 2.850 0.200
PCD0302□T121 120 K, M 1KHz, 0.25V 3.400 0.180
PCD0302□T151 150 K, M 1KHz, 0.25V 4.470 0.160
PCD0302□T181 180 K, M 1KHz, 0.25V 5.110 0.150
PCD0302□T221 220 K, M 1KHz, 0.25V 7.310 0.140
PCD0302□T271 270 K, M 1KHz, 0.25V 8.500 0.100
PCD0302□T331 330 K, M 1KHz, 0.25V 10.19 0.090
PCD0302□T471 470 K, M 1KHz, 0.25V 13.50 0.070

■Helisto is capable to design according to customer special requirement

PCD 0403 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD0403□TR50 0.5 M 100KHz, 0.25V 0.020 3.000
PCD0403□T1R0 1.0 M 100KHz, 0.25V 0.049 2.700
PCD0403□T1R0-1 1.0 N 100KHz, 0.1V 0.049 5.720
PCD0403□T1R2 1.2 M 100KHz, 0.25V 0.053 2.540
PCD0403□T1R4 1.4 M 100KHz, 0.25V 0.056 2.500
PCD0403□T1R5 1.5 M 100KHz, 0.25V 0.061 2.240
PCD0403□T1R8 1.8 M 100KHz, 0.25V 0.064 2.330
PCD0403□T2R2 2.2 M 100KHz, 0.25V 0.072 2.250
PCD0403□T2R2-2 2.2 M 100KHz, 1V 0.047 3.600
PCD0403□T2R7 2.7 M 100KHz, 0.25V 0.079 2.160
PCD0403□T3R3 3.3 M 100KHz, 0.25V 0.086 2.000
PCD0403□T3R9 3.9 M 100KHz, 0.25V 0.094 1.840
PCD0403□T4R7 4.7 M 100KHz, 0.25V 0.109 1.620
PCD0403□T5R6 5.6 M 100KHz, 0.25V 0.126 1.480
PCD0403□T6R8 6.8 M 100KHz, 0.25V 0.131 1.430
PCD0403□T8R2 8.2 M 100KHz, 0.25V 0.147 1.370
PCD0403□T100 10 K, M 1KHz, 0.25V 0.182 1.040
PCD0403□T120 12 K, M 1KHz, 0.25V 0.210 0.970
PCD0403□T150 15 K, M 1KHz, 0.25V 0.235 0.850
PCD0403□T150-2 15 M 1KHz, 0.25V 0.235 1.200
PCD0403□T180 18 K, M 1KHz, 0.25V 0.338 0.740
PCD0403□T220 22 K, M 1KHz, 0.25V 0.378 0.680
PCD0403□T270 27 K, M 1KHz, 0.25V 0.522 0.620
PCD0403□T330 33 K, M 1KHz, 0.25V 0.540 0.560
PCD0403□T390 39 K, M 1KHz, 0.25V 0.587 0.520
PCD0403□T470 47 K, M 1KHz, 0.25V 0.844 0.440
PCD0403□T560 56 K, M 1KHz, 0.25V 0.937 0.420
PCD0403□T680 68 K, M 1KHz, 0.25V 1.117 0.370
PCD0403□T820 82 K, M 1KHz, 0.25V 1.140 0.340
PCD0403□T101 100 K, M 1KHz, 0.25V 1.190 0.300
PCD0403□T121 120 K, M 1KHz, 0.25V 1.400 0.256
PCD0403□T151 150 K, M 1KHz, 0.25V 1.800 0.212
PCD0403□T181 180 K, M 1KHz, 0.25V 1.920 0.200
PCD0403□T221 220 K, M 1KHz, 0.25V 2.030 0.180
PCD0403□T271 270 K, M 1KHz, 0.25V 2.890 0.174
PCD0403□T331 330 K, M 1KHz, 0.25V 3.760 0.168
PCD0403□T391 390 K, M 1KHz, 0.25V 4.260 0.160
PCD0403□T471 470 K, M 1KHz, 0.25V 5.140 0.158
PCD0403□T561 560 K, M 1KHz, 0.25V 6.370 0.148
PCD0403□T681 680 K, M 1KHz, 0.25V 9.240 0.128
PCD0403□T821 820 K, M 1KHz, 0.25V 13.40 0.110
PCD0403□T102 1000 K, M 1KHz, 0.25V 15.60 0.109
PCD0403□T102-2 1000 K 1KHz, 0.25V 14.00 0.130

Note: PCD0403□T2R2-2 The DC current when the inductance becomes 30% lower than initial value
PCD0403□T102-2 The DC current when the inductance becomes 35% lower than initial value
■Helisto is capable to design according to customer special requirement

PCD 0502 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD0502□T1R0 1.0 M 100KHz, 0.25V 0.021 4.000
PCD0502□T1R2 1.2 M 100KHz, 0.25V 0.050 4.200
PCD0502□T1R5 1.5 M 100KHz, 0.25V 0.060 4.000
PCD0502□T1R8 1.8 M 100KHz, 0.25V 0.065 3.700
PCD0502□T2R2 2.2 M 100KHz, 0.25V 0.070 3.500
PCD0502□T2R7 2.7 M 100KHz, 0.25V 0.080 3.200
PCD0502□T3R3 3.3 M 100KHz, 0.25V 0.100 2.700
PCD0502□T3R9 3.9 M 100KHz, 0.25V 0.120 2.400
PCD0502□T4R7 4.7 M 100KHz, 0.25V 0.140 2.000
PCD0502□T5R6 5.6 M 100KHz, 0.25V 0.150 1.800
PCD0502□T6R8 6.8 M 100KHz, 0.25V 0.160 1.500
PCD0502□T8R2 8.2 M 100KHz, 0.25V 0.170 1.400
PCD0502□T100 10 K, M 1KHz, 0.25V 0.200 1.300
PCD0502□T120 12 K, M 1KHz, 0.25V 0.230 1.100
PCD0502□T150 15 K, M 1KHz, 0.25V 0.250 1.050
PCD0502□T180 18 K, M 1KHz, 0.25V 0.300 1.000
PCD0502□T220 22 K, M 1KHz, 0.25V 0.350 0.900
PCD0502□T270 27 K, M 1KHz, 0.25V 0.400 0.850
PCD0502□T330 33 K, M 1KHz, 0.25V 0.500 0.750
PCD0502□T390 39 K, M 1KHz, 0.25V 0.550 0.700
PCD0502□T470 47 K, M 1KHz, 0.25V 0.650 0.600
PCD0502□T560 56 K, M 1KHz, 0.25V 0.760 0.550
PCD0502□T680 68 K, M 1KHz, 0.25V 0.950 0.500
PCD0502□T820 82 K, M 1KHz, 0.25V 1.200 0.450
PCD0502□T101 100 K, M 1KHz, 0.25V 1.400 0.400
PCD0502□T121 120 K, M 1KHz, 0.25V 1.750 0.350
PCD0502□T151 150 K, M 1KHz, 0.25V 2.000 0.250
PCD0502□T181 180 K, M 1KHz, 0.25V 2.600 0.250
PCD0502□T221 220 K, M 1KHz, 0.25V 3.000 0.200
PCD0502□T271 270 K, M 1KHz, 0.25V 3.700 0.180
PCD0502□T331 330 K, M 1KHz, 0.25V 4.300 0.170
PCD0502□T391 390 K, M 1KHz, 0.25V 6.000 0.160
PCD0502□T471 470 K, M 1KHz, 0.25V 6.700 0.150
PCD0502□T102 1000 K, M 1KHz, 0.25V 15.00 0.140

■Helisto is capable to design according to customer special requirement

PCD0503 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD0503□T1R0 1.0 M 100KHz, 0.25V 0.03 4.50
PCD0503□T1R2 1.2 M 100KHz, 0.25V 0.03 4.20
PCD0503□T1R5 1.5 M 100KHz, 0.25V 0.03 4.10
PCD0503□T1R8 1.8 M 100KHz, 0.25V 0.03 3.70
PCD0503□T2R2 2.2 M 100KHz, 0.25V 0.03 3.50
PCD0503□T2R7 2.7 M 100KHz, 0.25V 0.04 3.20
PCD0503□T3R3 3.3 M 100KHz, 0.25V 0.05 2.80
PCD0503□T3R9 3.9 M 100KHz, 0.25V 0.06 2.60
PCD0503□T4R7 4.7 M 100KHz, 0.25V 0.07 2.50
PCD0503□T5R6 5.6 M 100KHz, 0.25V 0.08 2.40
PCD0503□T6R8 6.8 M 100KHz, 0.25V 0.09 2.20
PCD0503□T8R2 8.2 M 100KHz, 0.25V 0.10 2.00
PCD0503□T100 10 K, M 1KHz, 0.25V 0.13 1.80
PCD0503□T120 12 K, M 1KHz, 0.25V 0.16 1.75
PCD0503□T150 15 K, M 1KHz, 0.25V 0.19 1.70
PCD0503□T150-1 15 K, M 100KHz, 0.25V 0.15 1.70
PCD0503□T180 18 K, M 1KHz, 0.25V 0.21 1.60
PCD0503□T220 22 K, M 1KHz, 0.25V 0.28 1.50
PCD0503□T270 27 K, M 1KHz, 0.25V 0.32 1.40
PCD0503□T330 33 K, M 1KHz, 0.25V 0.38 1.10
PCD0503□T390 39 K, M 1KHz, 0.25V 0.42 1.00
PCD0503□T470 47 K, M 1KHz, 0.25V 0.43 0.90
PCD0503□T560 56 K, M 1KHz, 0.25V 0.50 0.85
PCD0503□T680 68 K, M 1KHz, 0.25V 0.68 0.80
PCD0503□T820 82 K, M 1KHz, 0.25V 0.82 0.65
PCD0503□T101 100 K, M 1KHz, 0.25V 1.10 0.60
PCD0503□T121 120 K, M 1KHz, 0.25V 1.20 0.58
PCD0503□T151 150 K, M 1KHz, 0.25V 1.50 0.43
PCD0503□T181 180 K, M 1KHz, 0.25V 1.80 0.41
PCD0503□T221 220 K, M 1KHz, 0.25V 2.00 0.38
PCD0503□T271 270 K, M 1KHz, 0.25V 2.90 0.35
PCD0503□T331 330 K, M 1KHz, 0.25V 3.30 0.28
PCD0503□T391 390 K, M 1KHz, 0.25V 3.70 0.26
PCD0503□T471 470 K, M 1KHz, 0.25V 4.90 0.20
PCD0503□T561 560 K, M 1KHz, 0.25V 5.00 0.19
PCD0503□T681 680 K, M 1KHz, 0.25V 6.00 0.18
PCD0503□T821 820 K, M 1KHz, 0.25V 6.60 0.15
PCD0503□T102 1000 K, M 1KHz, 0.25V 8.00 0.13
PCD0503□T102-2 1000 K 1KHz, 0.25V 11.50 0.135

Note: PCD0503□T150-1 The DC current when the inductance becomes 15% lower than initial value
■Helisto is capable to design according to customer special requirement

PCD0504 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD0504□TR60-1   P 100KHz, 1V 0.0182 11.00
PCD0504□T1R0 1.0 M 100KHz, 0.25V 0.010 5.00
PCD0504□T1R0-1 1.0 N 100KHz, 1V 0.0139 8.50
PCD0504□T1R2 1.2 M 100KHz, 0.25V 0.012 4.77
PCD0504□T1R5 1.5 M 100KHz, 0.25V 0.013 4.50
PCD0504□T1R8 1.8 M 100KHz, 0.25V 0.016 4.25
PCD0504□T2R2 2.2 M 100KHz, 0.25V 0.017 4.20
PCD0504□T2R2-1 2.2 N 100KHz, 1V 0.0251 6.00
PCD0504□T2R7 2.7 M 100KHz, 0.25V 0.025 4.00
PCD0504□T3R3 3.3 M 100KHz, 0.25V 0.034 2.50
PCD0504□T3R9 3.9 M 100KHz, 0.25V 0.035 2.20
PCD0504□T4R7 4.7 M 100KHz, 0.25V 0.035 2.00
PCD0504□T4R7-2 4.7 M 7.96MHz, 1V 0.060 3.00
PCD0504□T5R6 5.6 M 100KHz, 0.25V 0.042 1.82
PCD0504□T6R8 6.8 M 100KHz, 0.25V 0.060 1.69
PCD0504□T8R2 8.2 M 100KHz, 0.25V 0.060 1.56
PCD0504□T100 10 K, M 1KHz, 0.25V 0.100 1.44
PCD0504□T120 12 K, M 1KHz, 0.25V 0.120 1.40
PCD0504□T150 15 K, M 1KHz, 0.25V 0.140 1.30
PCD0504□T180 18 K, M 1KHz, 0.25V 0.150 1.23
PCD0504□T220 22 K, M 1KHz, 0.25V 0.180 1.11
PCD0504□T270 27 K, M 1KHz, 0.25V 0.200 0.97
PCD0504□T330 33 K, M 1KHz, 0.25V 0.230 0.88
PCD0504□T390 39 K, M 1KHz, 0.25V 0.320 0.80
PCD0504□T470 47 K, M 1KHz, 0.25V 0.370 0.72
PCD0504□T470-2 47 K 1KHz, 0.25V 0.370 1.50
PCD0504□T560 56 K, M 1KHz, 0.25V 0.420 0.68
PCD0504□T680 68 K, M 1KHz, 0.25V 0.460 0.61
PCD0504□T820 82 K, M 1KHz, 0.25V 0.600 0.58
PCD0504□T101 100 K, M 1KHz, 0.25V 0.700 0.52
PCD0504□T121 120 K, M 1KHz, 0.25V 0.930 0.48
PCD0504□T151 150 K, M 1KHz, 0.25V 1.100 0.40
PCD0504□T181 180 K, M 1KHz, 0.25V 1.380 0.38
PCD0504□T221 220 K, M 1KHz, 0.25V 1.570 0.35
PCD0504□T221-1 220 K 1KHz, 0.25V 1.570 0.47
PCD0504□T221-2 220 K 100KHz, 0.25V 1.400 0.40
PCD0504□T271 270 K, M 1KHz, 0.25V 1.600 0.34
PCD0504□T331 330 K, M 1KHz, 0.25V 1.820 0.32
PCD0504□T471 470 K, M 1KHz, 0.25V 2.760 0.30
PCD0504□T561 560 K, M 1KHz, 0.25V 3.100 0.29
PCD0504□T681 680 K, M 1KHz, 0.25V 4.050 0.28
PCD0504□T821 820 K, M 1KHz, 0.25V 5.560 0.27
PCD0504□T102 1000 K, M 1KHz, 0.25V 5.740 0.26
PCD0504□T122-1 1200 K 1KHz, 0.5V 6.400 0.16
PCD0504□T152-1 1500 K 1KHz, 0.5V 8.500 0.16
PCD0504□T222-1 2200 K 1KHz, 0.5V 12.800 0.10
PCD0504□T332 3300 K 1KHz, 0.25V 16.800 0.085
PCD0504□T332-1 3300 K 1KHz, 0.5V 24.00 0.08

Note: PCD0504□T1R0-1 / PCD0504□T2R2-1 The DC current when the inductance becomes 30% lower than initial value
PCD0504□TR60-1 / PCD0504□T470-2 The DC current when the inductance becomes 35% lower than initial value
■Helisto is capable to design according to customer special requirement

PCD0703 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD0703□T1R0 1.0 M 100KHz, 0.25V 0.018 1.64
PCD0703□T1R5 1.5 M 100KHz, 0.25V 0.020 1.60
PCD0703□T2R2 2.2 M 100KHz, 0.25V 0.023 1.60
PCD0703□T3R3 3.3 M 100KHz, 0.25V 0.025 1.59
PCD0703□T4R7 4.7 M 100KHz, 0.25V 0.039 1.54
PCD0703□T6R8 6.8 M 100KHz, 0.25V 0.040 1.49
PCD0703□T8R2 8.2 M 100KHz, 0.25V 0.080 1.46
PCD0703□T100 10 K, M 1KHz, 0.25V 0.080 1.44
PCD0703□T120 12 K, M 1KHz, 0.25V 0.090 1.39
PCD0703□T150 15 K, M 1KHz, 0.25V 0.104 1.24
PCD0703□T180 18 K, M 1KHz, 0.25V 0.111 1.12
PCD0703□T220 22 K, M 1KHz, 0.25V 0.129 1.07
PCD0703□T270 27 K, M 1KHz, 0.25V 0.153 0.94
PCD0703□T330 33 K, M 1KHz, 0.25V 0.170 0.85
PCD0703□T390 39 K, M 1KHz, 0.25V 0.217 0.74
PCD0703□T470 47 K, M 1KHz, 0.25V 0.252 0.68
PCD0703□T560 56 K, M 1KHz, 0.25V 0.282 0.64
PCD0703□T680 68 K, M 1KHz, 0.25V 0.332 0.59
PCD0703□T820 82 K, M 1KHz, 0.25V 0.406 0.54
PCD0703□T101 100 K, M 1KHz, 0.25V 0.481 0.51
PCD0703□T121 120 K, M 1KHz, 0.25V 0.536 0.49
PCD0703□T151 150 K, M 1KHz, 0.25V 0.755 0.40
PCD0703□T181 180 K, M 1KHz, 0.25V 1.022 0.36
PCD0703□T221 220 K, M 1KHz, 0.25V 1.200 0.31
PCD0703□T271 270 K, M 1KHz, 0.25V 1.306 0.29
PCD0703□T331 330 K, M 1KHz, 0.25V 1.495 0.28
PCD0703□T391 390 K, M 1KHz, 0.25V 1.700 0.27
PCD0703□T471 470 K, M 1KHz, 0.25V 2.100 0.26
PCD0703□T561 560 K, M 1KHz, 0.25V 2.660 0.25
PCD0703□T681 680 K, M 1KHz, 0.25V 3.000 0.23
PCD0703□T821 820 K, M 1KHz, 0.25V 3.630 0.21
PCD0703□T102 1000 K, M 1KHz, 0.25V 4.760 0.20

■Helisto is capable to design according to customer special requirement

PCD0705 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD0705□T1R0 1.0 M 100KHz, 0.25V 0.013 3.40
PCD0705□T1R5 1.5 M 100KHz, 0.25V 0.016 3.30
PCD0705□T1R8 1.8 M 100KHz, 0.25V 0.020 3.20
PCD0705□T2R2 2.2 M 100KHz, 0.25V 0.023 3.00
PCD0705□T2R5 2.5 M 100KHz, 0.25V 0.026 2.90
PCD0705□T2R7 2.7 M 100KHz, 0.25V 0.027 2.85
PCD0705□T3R3 3.3 M 100KHz, 0.25V 0.028 2.80
PCD0705□T4R7 4.7 M 100KHz, 0.25V 0.045 2.70
PCD0705□T5R6 5.6 M 100KHz, 0.25V 0.048 2.65
PCD0705□T6R8 6.8 M 100KHz, 0.25V 0.058 2.50
PCD0705□T8R2 8.2 M 100KHz, 0.25V 0.070 2.40
PCD0705□T100 10 K, M 1KHz, 0.25V 0.070 2.30
PCD0705□T120 12 K, M 1KHz, 0.25V 0.080 2.00
PCD0705□T150 15 K, M 1KHz, 0.25V 0.090 1.80
PCD0705□T180 18 K, M 1KHz, 0.25V 0.100 1.60
PCD0705□T220 22 K, M 1KHz, 0.25V 0.110 1.50
PCD0705□T270 27 K, M 1KHz, 0.25V 0.120 1.30
PCD0705□T330 33 K, M 1KHz, 0.25V 0.130 1.20
PCD0705□T390 39 K, M 1KHz, 0.25V 0.160 1.10
PCD0705□T470 47 K, M 1KHz, 0.25V 0.180 1.10
PCD0705□T560 56 K, M 1KHz, 0.25V 0.240 0.94
PCD0705□T680 68 K, M 1KHz, 0.25V 0.280 0.85
PCD0705□T820 82 K, M 1KHz, 0.25V 0.370 0.78
PCD0705□T101 100 K, M 1KHz, 0.25V 0.430 0.72
PCD0705□T121 120 K, M 1KHz, 0.25V 0.470 0.66
PCD0705□T151 150 K, M 1KHz, 0.25V 0.640 0.58
PCD0705□T181 180 K, M 1KHz, 0.25V 0.710 0.51
PCD0705□T221 220 K, M 1KHz, 0.25V 0.960 0.49
PCD0705□T271 270 K, M 1KHz, 0.25V 1.110 0.42
PCD0705□T331 330 K, M 1KHz, 0.25V 1.260 0.40
PCD0705□T391 390 K, M 1KHz, 0.25V 1.770 0.36
PCD0705□T471 470 K, M 1KHz, 0.25V 1.960 0.34
PCD0705□T561 560 K, M 1KHz, 0.25V 2.280 0.32
PCD0705□T681 680 K, M 1KHz, 0.25V 2.480 0.30
PCD0705□T821 820 K, M 1KHz, 0.25V 3.400 0.30
PCD0705□T102 1000 K, M 1KHz, 0.25V 4.200 0.30
PCD0705□T102-4 1000 K 100KHz, 0.25V 3.300 0.30
PCD0705□T102-5 1000 K 1KHz, 0.25V 4.500 0.34
PCD0705□T122 1200 K, M 1KHz, 0.25V 5.000 0.17
PCD0705□T122-1 1200 K 100KHz, 0.25V 4.500 0.28
PCD0705□T152 1500 K, M 1KHz, 0.25V 5.520 0.16

Note: PCD0705□T102-5 The DC current when the inductance becomes 35% lower than initial value
■Helisto is capable to design according to customer special requirement

PCD1004 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD1004□T1R0 1.0 M 100KHz, 0.25V 0.012 8.70
PCD1004□T1R2 1.2 M 100KHz, 0.25V 0.014 8.00
PCD1004□T1R5 1.5 M 100KHz, 0.25V 0.016 7.48
PCD1004□T1R8 1.8 M 100KHz, 0.25V 0.018 6.80
PCD1004□T2R2 2.2 M 100KHz, 0.25V 0.020 5.40
PCD1004□T2R7 2.7 M 100KHz, 0.25V 0.024 3.20
PCD1004□T3R3 3.3 M 100KHz, 0.25V 0.028 2.85
PCD1004□T3R9 3.9 M 100KHz, 0.25V 0.030 2.80
PCD1004□T4R7 4.7 M 100KHz, 0.25V 0.038 2.75
PCD1004□T5R6 5.6 M 100KHz, 0.25V 0.040 2.70
PCD1004□T6R8 6.8 M 100KHz, 0.25V 0.042 2.65
PCD1004□T8R2 8.2 M 100KHz, 0.25V 0.048 2.60
PCD1004□T100 10 K, M 1KHz, 0.25V 0.053 2.38
PCD1004□T120 12 K, M 1KHz, 0.25V 0.061 2.13
PCD1004□T150 15 K, M 1KHz, 0.25V 0.070 1.87
PCD1004□T180 18 K, M 1KHz, 0.25V 0.081 1.73
PCD1004□T220 22 K, M 1KHz, 0.25V 0.090 1.60
PCD1004□T270 27 K, M 1KHz, 0.25V 0.100 1.44
PCD1004□T330 33 K, M 1KHz, 0.25V 0.120 1.26
PCD1004□T390 39 K, M 1KHz, 0.25V 0.151 1.20
PCD1004□T470 47 K, M 1KHz, 0.25V 0.170 1.10
PCD1004□T560 56 K, M 1KHz, 0.25V 0.199 1.01
PCD1004□T680 68 K, M 1KHz, 0.25V 0.223 0.91
PCD1004□T820 82 K, M 1KHz, 0.25V 0.252 0.85
PCD1004□T101 100 K, M 1KHz, 0.25V 0.344 0.74
PCD1004□T121 120 K, M 1KHz, 0.25V 0.396 0.69
PCD1004□T151 150 K, M 1KHz, 0.25V 0.544 0.61
PCD1004□T181 180 K, M 1KHz, 0.25V 0.621 0.56
PCD1004□T221 220 K, M 1KHz, 0.25V 0.721 0.53
PCD1004□T271 270 K, M 1KHz, 0.25V 0.949 0.45
PCD1004□T331 330 K, M 1KHz, 0.25V 1.100 0.42
PCD1004□T391 390 K, M 1KHz, 0.25V 1.245 0.38
PCD1004□T471 470 K, M 1KHz, 0.25V 1.526 0.35
PCD1004□T561 560 K, M 1KHz, 0.25V 1.904 0.32

■Helisto is capable to design according to customer special requirement

PCD1005 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD1005□T1R2 1.2 M 100KHz, 0.25V 0.009 8.63
PCD1005□T1R5 1.5 M 100KHz, 0.25V 0.010 8.00
PCD1005□T2R2 2.2 M 100KHz, 0.25V 0.014 6.80
PCD1005□T3R3 3.3 M 100KHz, 0.25V 0.018 3.05
PCD1005□T4R7 4.7 M 100KHz, 0.25V 0.020 2.90
PCD1005□T4R7-1 4.7 M 100KHz, 0.25V 0.020 7.00
PCD1005□T6R8 6.8 M 100KHz, 0.25V 0.040 2.75
PCD1005□T8R2 8.2 M 100KHz, 0.25V 0.050 2.70
PCD1005□T100 10 K, M 1KHz, 0.25V 0.060 2.60
PCD1005□T120 12 K, M 1KHz, 0.25V 0.070 2.45
PCD1005□T150 15 K, M 1KHz, 0.25V 0.080 2.27
PCD1005□T180 18 K, M 1KHz, 0.25V 0.090 2.15
PCD1005□T220 22 K, M 1KHz, 0.25V 0.100 1.95
PCD1005□T270 27 K, M 1KHz, 0.25V 0.110 1.76
PCD1005□T330 33 K, M 1KHz, 0.25V 0.120 1.50
PCD1005□T390 39 K, M 1KHz, 0.25V 0.140 1.37
PCD1005□T470 47 K, M 1KHz, 0.25V 0.170 1.28
PCD1005□T560 56 K, M 1KHz, 0.25V 0.190 1.17
PCD1005□T680 68 K, M 1KHz, 0.25V 0.220 1.11
PCD1005□T820 82 K, M 1KHz, 0.25V 0.250 1.00
PCD1005□T101 100 K, M 1KHz, 0.25V 0.350 0.97
PCD1005□T121 120 K, M 1KHz, 0.25V 0.400 0.89
PCD1005□T151 150 K, M 1KHz, 0.25V 0.470 0.78
PCD1005□T181 180 K, M 1KHz, 0.25V 0.630 0.72
PCD1005□T221 220 K, M 1KHz, 0.25V 0.730 0.66
PCD1005□T271 270 K, M 1KHz, 0.25V 0.970 0.57
PCD1005□T331 330 K, M 1KHz, 0.25V 1.150 0.52
PCD1005□T391 390 K, M 1KHz, 0.25V 1.300 0.48
PCD1005□T471 470 K, M 1KHz, 0.25V 1.480 0.42
PCD1005□T561 560 K, M 1KHz, 0.25V 1.900 0.33
PCD1005□T681 680 K, M 1KHz, 0.25V 2.250 0.28
PCD1005□T821 820 K, M 1KHz, 0.25V 2.550 0.24
PCD1005□T102 1000 K, M 1KHz, 0.25V 3.490 0.20

■Helisto is capable to design according to customer special requirement

PCD1006 Type(□:Tolerance) (Electrical Characteristics)

Part No. L (μH) Tolerance Test Condition DCR (Ω) max. IDC (A) max.
PCD1006□T1R0 1.0 M 100KHz, 0.25V 0.008 9.50
PCD1006□T1R8 1.8 M 100KHz, 0.25V 0.011 8.60
PCD1006□T2R2 2.2 M 100KHz, 0.25V 0.012 7.20
PCD1006□T3R3 3.3 M 100KHz, 0.25V 0.016 6.80
PCD1006□T3R9 3.9 M 100KHz, 0.25V 0.017 6.35
PCD1006□T4R7 4.7 M 100KHz, 0.25V 0.019 5.45
PCD1006□T5R6 5.6 M 100KHz, 0.25V 0.024 4.30
PCD1006□T6R8 6.8 M 100KHz, 0.25V 0.035 3.52
PCD1006□T8R2 8.2 M 100KHz, 0.25V 0.045 3.51
PCD1006□T100 10 K, M 1KHz, 0.25V 0.060 3.50
PCD1006□T120 12 K, M 1KHz, 0.25V 0.070 3.40
PCD1006□T150 15 K, M 1KHz, 0.25V 0.080 3.10
PCD1006□T180 18 K, M 1KHz, 0.25V 0.090 3.00
PCD1006□T220 22 K, M 1KHz, 0.25V 0.100 2.60
PCD1006□T270 27 K, M 1KHz, 0.25V 0.110 2.40
PCD1006□T330 33 K, M 1KHz, 0.25V 0.120 2.30
PCD1006□T390 39 K, M 1KHz, 0.25V 0.140 2.10
PCD1006□T470 47 K, M 1KHz, 0.25V 0.170 1.95
PCD1006□T560 56 K, M 1KHz, 0.25V 0.190 1.85
PCD1006□T680 68 K, M 1KHz, 0.25V 0.220 1.65
PCD1006□T820 82 K, M 1KHz, 0.25V 0.250 1.50
PCD1006□T101 100 K, M 1KHz, 0.25V 0.350 1.40
PCD1006□T121 120 K, M 1KHz, 0.25V 0.400 1.30
PCD1006□T151 150 K, M 1KHz, 0.25V 0.470 1.20
PCD1006□T181 180 K, M 1KHz, 0.25V 0.630 1.00
PCD1006□T221 220 K, M 1KHz, 0.25V 0.730 0.95
PCD1006□T271 270 K, M 1KHz, 0.25V 0.970 0.90
PCD1006□T331 330 K, M 1KHz, 0.25V 1.150 0.80
PCD1006□T391 390 K, M 1KHz, 0.25V 1.300 0.75
PCD1006□T471 470 K, M 1KHz, 0.25V 1.480 0.65
PCD1006□T561 560 K, M 1KHz, 0.25V 1.900 0.60
PCD1006□T681 680 K, M 1KHz, 0.25V 2.250 0.50
PCD1006□T821 820 K, M 1KHz, 0.25V 2.550 0.48
PCD1006□T102 1000 K, M 1KHz, 0.25V 3.000 0.46

■Helisto is capable to design according to customer special requirement

Files Download

RoHS Report


Best Sale

Company Introduction

aboutaboutaboutaboutabout


Resistor

Resistor

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

View More
Inductor

Inductor

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

View More
Capacitor

Capacitor

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

View More